Key Features
1. Dual AMD® Opteron™ 2000 Series, (Socket F) Support,, 1000 MHz HyperTransport Link
2. nVidia MCP55 Pro, nVidia IO-55 Chipset, NEC uPD720400
3. Up to 16GB DDR2 667 SDRAM (or), Up to 16GB DDR2 533 SDRAM (or), Up to 32GB DDR2 400 SDRAM
4. Dual-port Gigabit, LAN/Ethernet Controller
5. 6 SATA2 3.0Gbps Ports
6. 2 (x16), 1 (x8) & 1 (x4) PCI-e,, 1 64-bit 133MHz PCI-X,, 1 64-bit 100MHz PCI-X
7. SIMLP IPMI 2.0 Support
8. 8 Fan Support with Speed Control

Physical Stats
Form Factor
- Extended ATX

Dimensions
- 12" x 13.05" (30.5cm x 33.2cm)

Processor/Chipset
CPU
- Dual 1207-pin Socket F
- Supports up to two Dual-Core AMD Opteron™ 2000 Series(Socket F) processor(s)

System Bus
- 1000MHz HyperTransport

Chipset
- nVidia MCP55 Pro
- nVidia IO-55
- NEC uPD720400

System Memory
Memory Capacity
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 667 MHz memory or
- Supports up to 16 GB DDR2 533 MHz memory or
- Supports up to 32 GB DDR2 400 MHz memory or
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks

Memory Type
- DDR2 667/533/400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes
- 256MB, 512MB, 1GB, 2GB, 4GB

Memory Voltage
- 1.8 V only

Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)

On-Board Devices
SATA
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support

IPMI
- Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-SIMLP)
- RMM (Remote Management Module)
- (Card not included)

Network Controllers
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Super I/O
- Winbond 83627HF

Audio
- HD Audio 7.1 Sound

Input / Output
SATA
- 6 SATA2 ports

IDE
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133

Floppy
- 1 Floppy port; 1.44 MB support

LAN
- 2 RJ45 LAN ports

USB
- FUCI
- Up to 8 USB Ports 2.0 Compliant
- 4 Rear Ports
- 4 Internal Headers

Keyboard / Mouse
- PS/2 keyboard and mouse ports

Serial Ports
- 2 Fast UART 16550 serial ports

Parallel Port
- 1 ECP / EPP parallel port

Audio
- 1 Line In / Line Out / Microphone port
- 3 Audio Jacks for 7.1 Sound

Firewire
- 2x 1394 internal headers

Chassis ( Optimized for H8DAE-2 )
Rackmount Tower / 4U
- SC745TQ-700
- SC745TQ-R700
- SC745TQ-800
- SC745TQ-R800
- SC743i-645
- SC743T-645
- SC743i-650
- SC743T-650
- SC743i-R760
- SC743T-R760
- SC743TQ-R760

Important Chassis Notes
- To ensure system stability, a 550W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]

Expansion Slots
PCI-Express
- 2 x16 PCI-e Slots
- 1 x8 PCI-e Slot
- 1 x4 PCI-e Slot

PCI-X
- 1 64-bit 133MHz PCI-X (3.3V) slots
- 1 64-bit 100MHz PCI-X (3.3V) slot

System BIOS
BIOS Type
- 8Mb Flash EEPROM with AMI® BIOS

BIOS Features
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3

Management
Software
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog

Power Configurations
- ACPI Power Management
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
- Suspend to RAM (STR)

PC Health Monitoring
CPU
- Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
- CPU 4-Phase-switching voltage reulator

FAN
- Total up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors

Temperature
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic

LED
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED

Other Features
- Chassis Intrusion Detection
- Chassis Intrusion Header

Warranty:

•     Return for credit: 15 Day(s)
•     Return for repair/replacement: 1 Year(s)